Our products
DIGITAL WATER LEVEL RECORDER (PIEZOMETER)
Digital Water Level Recorder provides highly accurate water level measurements for a wide variety of applications, including those in harsh environments. The submersible pressure transducers have a dynamic pressure compensation system, enabling high-accuracy measurements over a wide measuring range. The water level sensor is adapted to all data loggers, telemetry, monitoring equipment, and LCD/LED displays. Each of the stainless steel water level sensors consists of a solid-state submersible pressure transducer encapsulated in stainless steel 2-10 inch length housing. The water level sensor has a molded-on waterproof cable and a two-wire 4-20 mA high-level output for connection to a monitoring device.


AMBIENT AIR QUALITY MONITORS
Air quality monitors are tools for air quality professionals and enthusiasts alike to gather real-time information on the surrounding air. They are a flexible air quality monitoring solution that can be configured with 30+ different gases(depend on requirement ) sensors and particle sensors for a range of uses from environmental monitoring to industrial applications.


OPTICAL DUST MEASUREMENT
The scattered light meters are delivered with the sender and receiver units gathered in one unit. Light is sent into the process by a well-defined angle in relation to the flow direction. The sender/receiver unit is also installed in a well-defined angle in relation to the flow direction. The light that the dust particles in the process reflect back onto the receiver unit is an expression of the dust concentration in the process. Optical dust measurement is a relative and not an absolute measurement because the dust particles do not have a well-defined density and because the reflecting/absorbing qualities will vary depending on the application.


COMBOSAMPLER
We have developed its new and advance Multi parameter air sampler. With the feature of simultaneous sampling of PM 10, PM 2.5, and four different water solu blegases.We uses USEPA designed PM 2.5 Impactor with dual stage Imp actor. PM 10 is sampled through EN12341 low flow impactor. Four different independently controlled gases can be sampled in glass impinge in a gaseous sampling attachment through wet chemical method. All the parameters are sampled at a time with each technology approved by international bodies for environmental sampling like the European Union, CPCB, and USEPA.


TRIBO-ELECTRIC SPM
The principle of tribo-electric dust measurement is that whenever a dust particle hits an electrically loaded metal stick, which has been placed across a flue gas duct, the charge of the metal stick is changed. The more dust particles hitting the stick per time unit, the more it influences the metal stick. The changes in the charging of the metal stick are an expression of the dust concentration of the process. As the dust particles do not have a well-defined density and as their own charging is different from the process to process, the tribo-electric dust meters must be calibrated by an accredited test laboratory to relate the relative measurement to mg/m3.


ONLINE WATER ANALYZER
A Continuous Effluent Monitoring System (Water Analyser) measures and records the quality of industrial wastewater and emissions. It utilizes specialized sensors to continuously monitor parameters like pH, BOD, COD, TSS, and flow rate, providing real-time data to ensure compliance with environmental regulations. The system helps optimize treatment processes and enhance sustainability. By measuring UV light absorption or transmission (200nm to 750nm), it identifies the presence and concentration of specific chemicals.
This reliable and cost-effective analyzer is easy to install, requires minimal maintenance, and is suitable for wastewater treatment, drinking water, process control, and environmental monitoring.


AUTOMATIC WEATHER MONITORING SYSTEM
A weather station is a facility that uses specialized instruments to measure key atmospheric parameters such as temperature, humidity, pressure, wind speed and direction, precipitation, and solar radiation. These measurements provide essential real-time and historical data for weather forecasting, climate monitoring, agriculture, aviation, and emergency management. Weather stations are crucial for collecting and sharing information that aids decision-making across various sectors, enhancing safety and preparedness for changing weather conditions.
By continuously monitoring these factors, they offer valuable insights into short-term weather patterns and long-term climate trends, ultimately helping societies adapt to the Earth's evolving atmosphere.


Address
Uttar Pradesh
Mohmad Nagar,HakimWali Gali,NearJama Masjid, Noorpur,Bijnor,U.P-246734
Gujarat
Golden Park. D Building, Flat No. 302, Nayer ShalimarUn
Surat-394185
Delhi
Corporate Office Address:
RZ-F1/125, Bkh No.88/21U/G/F,
GaliNo-1, Mahavir Enclave Palam, NewDelhi-110045
Contact Us
For: Feedback
Mob: 7078669658, +91-8287799829
E-mail: sales.futureenvirons@gmail.com
Still Thinking ?
Get Our Free Brochure Now


Aligarh
Green valley street no.2 patwari nagla, near aqsa masjid aligarh -202002, U.P
Gurugram
HCBS Sports Ville Shop No 56 Sector 2 & 35 Sohna Gurgaon, Haryana- 122103
OPENING HOURS
9:00 AM - 6:30 PM